Ghost 2 Immobiliser Problems
It is designed to safeguard vehicles from hacking and key cloning, The Ghost 2 immobiliser is a discreet device that can be installed without damaging your vehicle. It prevents your vehicle from starting unless you enter an exact sequence of keys within your vehicle similar to the password you enter on mobile phones.
Stop/Start
Ghost Immobilisers stop vehicles being stolen by stopping the engine from running unless it receives the correct PIN code. This is accomplished without any modifications to the vehicle and is completely undetectable to thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is very similar to the one automobile manufacturers have been using in their vehicles for a long time however, the criminal isn't able to add a key or utilize key relay technology to bypass it, as they can with factory fitted systems.
Ghost is compatible with any vehicle that has an engine, including motorhomes, vans, cars and caravans as well as bikes. The same system is also compatible with electric vehicles. It is an excellent alternative to steering wheel locks and wheel clamps, and can be installed with minimal effort.
When the Ghost is activated, it will block all buttons in your car and prevent the ignition from being started without a PIN code. This can be done via the Android or Apple mobile apps or by manually entering the code via your key fob. If a code that is incorrectly entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent. if the vehicle can't be started, the burglar will continue to pursue a new victim.
The Ghost is small, weatherproof device that can be hidden in the most difficult to access areas of your vehicle. It is extremely simple to install and takes an average of 20-30 minutes per vehicle. It is also easy to remove if you choose to switch vehicles, or give it to a service center or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognized by a number of insurance companies. It also comes with a safe emergency Pin Code override and features a Service/Valet mode that can be activated with the application's button or by using your key fob.
Disarm
Unlike the mechanical anti-theft devices, which are able to be removed Ghost immobilisers are hidden and are integrated into the car. Even if they were found, thieves would not be able to start the vehicle. They are virtually impossible to hack or bypass. Ghost immobilisers are capable of preventing key cloning and devices spoofing signals and signal jamming. These are methods that thieves employ to gain entry into cars that have standard immobilisers.
The immobiliser sends a code to the ECU. If a incorrect code is received and the vehicle is not started as the engine won't start up. It is possible to disable a ghost immobiliser using an application program, but it's extremely difficult and time-consuming to accomplish this. The software can only be installed and used by a authorised installer.
The Ghost immobiliser, a small system, is hidden within the wiring loom of your vehicle. It is inaccessible to the naked eye after it has been installed. It does not appear on diagnostic systems. There are no LED indicators and it doesn't communicate with the engine through the OBD port. It communicates silently via the CAN data circuit.
The system will not allow the vehicle to start unless it is given an input PIN code that is entered by the user. This can be entered using buttons on the steering wheel, door panels or centre console. This is a better way to protect the car, because it doesn't need a remote control or key fob.
Ghost also comes with a service mode that can be turned on via the mobile application. This allows you to hand over your keys to someone else for valet parking or servicing without entering the disarm sequence.
No matter if your Ghost is in service mode or not, you should never attempt to remove the system by yourself because it could affect your engine and cause damage. It is recommended to contact an TASSA-certified installer who can safely and properly remove the system. Our latest GHOST II immobilisers also come with a special QR fingerprint sticker that is hidden in different areas of your vehicle. these are linked to our global security register. In the event the system is removed and is sold on the black market, this will connect it back to its original owner.
Anti-Hijack
Ghost Immobiliser 2 has a extremely useful anti-hijack feature. It functions like smart keys and is one of the most secure ways to protect your vehicle from thieves. The Ghost system will automatically turn on the hazard light and stop the engine when the ignition is switched on and the vehicle is stationary. This gives the driver and passengers enough time to press the secure button before the system is activated.
Contrary to many other systems that simply stall the engine when the ignition is switched to on, the Ghost system is based on a specific controller and timer unit that will shut off the fuel cut-off valve 14 when it is activated after the set time even when the ignition is turned on! The delay time must be long enough for the hijacked vehicle owner to drive away and a distance sufficient from the vehicle that is stalled before the system can be activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an additional security feature that blocks common hacking methods employed to gain access to modern vehicles, such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a quiet manner and does not emit signals that can be picked by a thief using RF scanning or code-grabbing technology.
The Ghost system comes with a service / valet mode that allows your car to be temporarily started and driven without the need for a PIN code. This is ideal when you park your vehicle and have to leave it for a brief amount of time, for example to put groceries in the boot, or open a garage door etc. The system will end service mode according to speed and duration or by using the easy PIN code input process and give you assurance that only you can use your car!
Keyless Entry
Many consumers are now seeking out additional security measures because of the growing trend of thefts from cars using contactless. This is particularly relevant for those who have invested time and money in customizing their vehicle or own rare/expensive automobiles. Immobilisers that are added to your vehicle can be an effective way to prevent this type of theft as they can prevent your vehicle from starting until proper pin code is entered, along with your key fob.
Immobilisers are designed to intercept the various circuits in a vehicle which include ones that control the starter motor and fuel pump. ghost immobiliser for sale have the capability of shutting the car alarm to draw attention to and frighten away any potential thieves.
These devices communicate directly with the engine control unit using the CAN data network. They prevent the thief from bypassing it by installing a new ECU or by using key programmers. These immobilisers are installed in a discreet manner inside your vehicle, leaving no traces and are totally inaccessible to the tools hi-tech thieves use.
The Ghost immobiliser is unlike other systems which require the driver to wear an app or tag. Instead, you are able to choose your personal pin sequence by pressing a pattern on your steering, door panel, or centre console. The pin can easily be changed, making the device as secure as a credit card. It is also more difficult to break since it requires as many as 20 presses.
Ghost also offers the option of a valet/service mode that allows you to disable the system if your car is to be turned over to valet parking or services and allows it to operate within predetermined guidelines, such as 30mph speed limits, so you don't have to worry about your car being driven recklessly. The system can be activated by using the original key or corresponding entry code.
This makes it the most effective and secure aftermarket CAN immobiliser available on the market and is fully insurance-approved by Thatcham as an accessory for your car when installed by one of our accredited installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card with your unique QR code as well as an emergency number that is secure which can be kept in the purse or wallet of your car.